de Lisle Dartford 30 Amplifier

$2,299.00

de Lisle Dartford 30 Amplifier

$2,299.00

Based on the legendary British design with linearly variable output from <1W to 30W from a pair of EL34s. See tabs below for full details and specifications. Recommended speaker: Weber Alnico Blue Dog

Please select a Style

Maximum quantity exceeded

Minimum purchase amount of 0 is required

Maximum purchase amount of 0 is allowed

Your Price: $2,299.00

2299.000

A one-time price of $2,299.00 will be added to your order.

Specs
Options

• Linearly Variable Output Up to 30W
• 2 Channel (Topboost, EF86)
• Channel Link Switch
• Bass (Top Boost)
• Treble (Top Boost)
• Volume (Top Boost)
• Volume (EF86)
• Bright Switch (EF86)
• Top Cut
• VarioDyne
• Gold Logo
• Red Control Panel
• Power / Standby Switch
• GZ34 Tube (1)
• 12AX7 Tube (2)
• EF86 Tube (2)
• EL34 Tube (2)
• Cathode Bias
• Weber Alnico Blue 12″ Speaker
• Mercury Magnetics Transformers
• Hand-Wired, Turret Board Construction
• Star Grounding
• Shielded Input/Grid Wiring
• DC Elevated Heater Supply
• Silver Plated Copper / TFE Teflon Wire
• Aluminum Chassis
• Dimensions: 20W x 18.75H x 10.5D
• Solid Pine Cabinet
• Fawn Tolex
• Brown Diamond Grillcloth
• Made in the USA

Note: specifications subject to change based on selected options.

Some options are not available on all models or they may be standard features. Please refer to the Specs tab and the section above for this particular model.

• Configuration
Most amps are available as a head (amp and shell only), 1×12 combo, 2×12 combo or 2×10 combo.

• Tolex Color
The color of the main cabinet. We have quite a few options. If your desired color isn’t listed, let us know. We’ll see about getting it for you.

• Grill Cloth
Only applicable to combos. This material covers the speaker.

• Speaker
We offer a variety of Eminence, Celestion and Jensen speakers. If you need a recommendation, just let us know! If you’re ordering a head, you don’t need to select anything here.

Second Speaker
If you’re getting a 2×10 or 2×12, select this option. Feel free to mix or match speakers.

• Output Tube
Certain amps can be built with one of a few output tubes. If you’d rather have an amp with a 6V6 over an EL84, you have the option.

• Adjustable Boost with Footswitch
Replaces the boost switch (if equipped) with a potentiometer allowing for variable boost. The boost can also be activated remotely by the included footswitch.

• Aged Speaker Cone
We chemically age the speaker cone in addition to a physical break-in.

• DC Heater Supply
The tube heaters are run from DC instead of AC to help eliminate hum. (Our amps are already crazy quiet, so this one is here for completeness.)

• EF86 Pentode-Triode Switch
On models equipped with an EF86 preamp tube, this option allows the tube to operate in “triode” mode. This reduces the gain and changes the character of the EF86 – adding an alternate voice to the amp. The switch is included in the Expanded Control Panel option. Otherwise, it is installed on the bottom (combo) or back (head) of the chassis.

• External Speaker Out
Adds an additional speaker jack in order to drive an external cabinet. The internal speaker is disconnects when in use.

• Headphone Out
Plug in your phones and mute the speaker for quite practicing. A load is switched in to protect the amp.

• Tube Buffered FX Loop
High quality tube buffered loop with Send Level and Mix Return Level controls.

• Tube Rectifier
For big bottle power tubes, we generally use a GZ34. EL84/6973 amps employ an EZ81. We’re happy to use other types as well.

• Tube Reverb
An updated version of the classic effect. Our circuit was redesigned to complement modern 17″ spring reverb tanks.

• Tube Tremolo
Our Tremolo is the bias modulation variety. It modulates one of the preamp tubes, so there is no stress on the power amp or power supply. Smooth, slow and swampy to moderate speed – not a helicopter effect. Includes Speed and Depth controls.

• Unbalanced Line Out with Level Control
This option adds a 1/4″ line out from the speaker tap with a level control.

• VarioDyne Power Output
Linearly adjustable power output with compensated AC signal levels from one knob… The VarioDyne is our take on power reduction through voltage control. Unlike similar methods that only manipulate DC voltages, the VarioDyne also controls the AC signal voltages coming into the reduced power stages. Our approach eliminates the need for an additional Master / Drive pot by reducing the input signal to suit the new DC operating point. We do this without reducing the preamp DC voltages to maintain a smooth overdrive. The VarioDyne is great for matching stage volume to a specific venue, dropping the output for the studio or even playing at home. Want to overdrive the power amp without alienating friends and neighbors? Just turn down Volume 2 knob to adjust the power output while maintaining the amp’s character and tone. Simple and effective.

• XLR Out with Level Control
Adds a transformer isolated XLR and level control off the speaker tap.

Related Products

de Lisle Vintage Studio Collection Amplifiers

$729.00

Available in four classic voicings, the Vintage Studio Collection of amps feature 5 watts of tube tone in a hand-wired box small enough to fit in a lunchbox. Additional features include a linearly variable attenuator and power amp in jack. Available as a head only. See tabs below for full details and specifications.

Select Options

de Lisle Vintage Studio Collection Amplifiers

Available in four classic voicings, the Vintage Studio Collection of amps feature 5 watts of tube tone in a hand-wired box small enough to fit in a lunchbox. Additional features include a linearly variable attenuator and power amp in jack. Available as a head only. See tabs below for full details and specifications.

$729.00

Select Options

de Lisle Vintage Studio Collection Amplifiers

$729.00

Select Options

Successfully Added to your Shopping Cart

Adding to Cart...
￩

￫

de Lisle Rutgers Reverb Amplifier

$2,399.00

The Rutgers Reverb is our first vintage inspired amp. An homage to a mid-sixties classic, the single channel Rutgers Reverb pumps out 23 watts through a 12″ speaker housed in a solid pine cabinet. See tabs below for full details and specifications. Recommended speaker: Weber 12F150.

Select Options

de Lisle Rutgers Reverb Amplifier

The Rutgers Reverb is our first vintage inspired amp. An homage to a mid-sixties classic, the single channel Rutgers Reverb pumps out 23 watts through a 12″ speaker housed in a solid pine cabinet. See tabs below for full details and specifications. Recommended speaker: Weber 12F150.

$2,399.00

Select Options

de Lisle Rutgers Reverb Amplifier

$2,399.00

Select Options

Successfully Added to your Shopping Cart

Adding to Cart...

de Lisle Eighty-Sixed: EF86 Tube Preamp-Overdrive

$379.00

The de Lisle Eighty-Sixed is a tube preamp born of our unique amplifier designs. The tube line up includes an EF86 pentode fronted by a 12AX7 twin-triode. This arrangement allows the true character of the pentode to be heard, since it can be driven by a larger signal than those produced by guitar pickups. And by cranking up the Gain knob, the Eighty-Sixed makes a fantastic tube overdrive pedal. No opamps, transistors or clipping diodes--what you get is 100% high voltage pentode overdrive.

Maximum quantity exceeded

Minimum purchase amount of 0 is required

de Lisle Eighty-Sixed: EF86 Tube Preamp-Overdrive

$379.00

ADD TO CART CHECKOUT NOW

de Lisle Eighty-Sixed: EF86 Tube Preamp-Overdrive

$379.00

ADD TO CART CHECKOUT NOW

Successfully Added to your Shopping Cart

Adding to Cart...