de Lisle Amp-Speaker Selector 8×8 with Reactive Attenuator

de Lisle Amp-Speaker Selector 8x8 with Reactive Attenuator

$1,299.00
de Lisle Amp-Speaker Selector 8x8 with Reactive Attenuator
de Lisle Amp-Speaker Selector 8x8 with Reactive Attenuator
de Lisle Amp-Speaker Selector 8x8 with Reactive Attenuator
de Lisle Amp-Speaker Selector 8x8 with Reactive Attenuator
de Lisle Amp-Speaker Selector 8x8 with Reactive Attenuator
de Lisle Amp-Speaker Selector 8x8 with Reactive Attenuator

de Lisle Amp-Speaker Selector 8x8 with Reactive Attenuator

$1,299.00
The de Lisle Amp-Speaker 8x8 with Reactive Attenuator was designed to improve workflow in the studio by eliminating the need to re-cable amps and speaker cabinets. This version expands on our previous designs by incorporating a built-in reactive attenuator that can be used as a load box for silent recording along with a transformer isolated D.I.

The front panel includes an input for your guitar or pedal followed by a three position power switch; off, mute and on. The handy ground switch will allow you to bypass the input isolation transformers should any amp need quieting down. Multiple functions are controlled by the Amplifier dial. Selecting positions 1-8 will:

• Route the guitar input to the selected amp's input
• Send the amp's output to the selected speaker
• Mute all unused amps at their input
• Switch unused amps to a load

Easily pair any of your amps with one of up to four connected cabinets by rotating the speaker switch. Should you need to roll back the SPL in the room, but keep your amp operating in the sweet spot, turn on the internal reactive attenuator. Attenuation is linearly variable from -6dB up to -22.5dB. Our unique design eliminates the need for impedance matching at the amp. Just connect your amp's 8 ohm output to the 8x8 Amp-Speaker Selector, then you can use any cab between 16 and 4 ohms.

Do you still want to be able to connect an Ox, Fryette Power Station or Boss Tube Amp Expander? No problem! The rear panel jacks allow you to insert an external attenuator which disconnects the internal reactive attenuator and D.I. functions.

With the hi-fi quality, transformer isolated D.I., you can go straight into your DAW and load up your favorite IRs. Use a TS cable for unbalanced or TRS for a balanced connection to your recording interface. The 8x8 Amp-Speaker Selector with Reactive Attenuator can also function as a reactive load box. Just flip the switch to disconnect the speaker and record silently.

The 8x8 Amp-Speaker Selector with Reactive Attenuator will quickly become mission control for your studio. Need help deciding which product is the best fit for you? Please feel free to reach out by phone or email. We're happy to help!

Patent Pending.
Maximum quantity exceeded
Minimum purchase amount of 0 is required
Maximum purchase amount of 0 is allowed
Your Price: $1,299.00
1299.000
A one-time price of $1,299.00 will be added to your order.
Facebook
Twitter
Email
Pinterest
Google+
Digg
  • Specs

• Input Impedance: 1 Meg
• Output Impedance: 500 Ohm
• Input Sensitivity: +15 Vp-p
• Switching Time: 4-8ms
• Contact Resistance: 0.075 Ohm
• Power Consumption: 2.6W Max
• Guitar / Pedalboard Input (1)
• Amplifier Input (8)
• Amplifier Output (8)
• Speaker Input (8)
• Attenuator Input (1)
• Attenuator Output(1)
• Attenuator Bypass Switch
• Transformer Isolation
• Internally Isolated DC Power Supply
• Increased Signal Headroom
• Silver Relay Contacts with Gold Overlay
• Protection Loads for Unused Amplifiers
• Auto Muting of Unused Amplifiers
• 2U Chassis with Laser Etched Panels
• 9VDC 500mA Power Supply Included
• Hand-Wired
• 100W Recommended Maximum Power
• Optimized for 8 Ohms
• Linearly Variable Attenuation to -22.5dB
• Reactive Load Box
• 80hz Resonant Frequency
• Premium US Made Inductors
• Parallel Speaker Jacks
• Use 16, 8 or 4 Ohm Cabs with the Attenuator
• Silent Recording Switch
• 20hz-20Khz Transformer Isolated D.I.
• D.I. Level Control
• Lifetime Warranty
Manual