de Lisle String Ferrule Block – Aluminum

de Lisle String Ferrule Block - Aluminum

$35.00
de Lisle String Ferrule Block - Aluminum
de Lisle String Ferrule Block - Aluminum
de Lisle String Ferrule Block - Aluminum
de Lisle String Ferrule Block - Aluminum
de Lisle String Ferrule Block - Aluminum
de Lisle String Ferrule Block - Aluminum
de Lisle String Ferrule Block - Aluminum
de Lisle String Ferrule Block - Aluminum

de Lisle String Ferrule Block - Aluminum

$35.00
Our string block was born out of a desire to make construction more streamlined. After doing some research, we discovered that Leo Fender had already introduced a similar plastic block on certain G&L guitars. Ours is a little different from Leo's in that it is made from 6061 aluminum or brass.

Our new design adds more mass and a "lip" around the top edge. This helps hide any paint or router imperfections that would be visible with our previous flush-mount design.

Our ferrule blocks feature a .25" radius on both ends. This allows the slot in the back of the guitar to be cut using a .5" diameter router bit with a shank mounted guide bearing (not included).
  • Buy 3-4 at $31.34 each
  • Buy 5-6 at $29.61 each
  • Buy 7-9 at $28.04 each
  • Buy 10 or more at $26.40 each
Do you need a Router Template?
Maximum quantity exceeded
Minimum purchase amount of 0 is required
Maximum purchase amount of 0 is allowed
Your Price: $35.00
35.000
A one-time price of $35.00 will be added to your order.
Facebook
X
Email
Pinterest
  • Specs
String Spacing: 2.125″.
Depth Under Lip: 1/2"
Overall Length (Including Lip): 3"
Weight: ~1.2 oz

Related Products

  • ￩
    ￫
    de Lisle String Ferrule Block - Brass

    de Lisle String Ferrule Block - Brass

    $39.99
    Our string block was born out of a desire to make construction more streamlined. After doing some research, we discovered that Leo Fender had already introduced a similar plastic block on certain G&L guitars. Ours is a little different from Leo's in that it is made from 6061 aluminum or brass.

    Our new design adds more mass and a "lip" around the top edge. This helps hide any paint or router imperfections that would be visible with our previous flush-mount design.

    Our ferrule blocks feature a .25" radius on both ends. This allows the slot in the back of the guitar to be cut using a .5" diameter router bit with a shank mounted guide bearing (not included).
    • Buy 3 at $37.99
    • Buy 5 at $35.99
    • Buy 7 at $33.99
    • Buy 10 at $31.99
    Estimated ship date
    de Lisle String Ferrule Block - Brass

    de Lisle String Ferrule Block - Brass

    $39.99
    Our string block was born out of a desire to make construction more streamlined. After doing some research, we discovered that Leo Fender had already introduced a similar plastic block on certain G&L guitars. Ours is a little different from Leo's in that it is made from 6061 aluminum or brass.

    Our new design adds more mass and a "lip" around the top edge. This helps hide any paint or router imperfections that would be visible with our previous flush-mount design.

    Our ferrule blocks feature a .25" radius on both ends. This allows the slot in the back of the guitar to be cut using a .5" diameter router bit with a shank mounted guide bearing (not included).
    Estimated ship date

    de Lisle String Ferrule Block - Brass

    $39.99
    Estimated ship date
    Successfully Added to your Shopping Cart
    Adding to Cart...
  • ￩
    ￫
    de Lisle Pentatone Switch

    de Lisle Pentatone Switch

    $45.00
    This is the same passive tone control that we use in our guitars. It's similar to the Gibson Varitone switch in function. We use a quality 6-position switch that features five frequency settings in addition to true bypass. Our design is vintage correct and a true notch filter. A "two wire" Varitone is not a proper notch filter. See the picture below for the difference in frequency response. The Pentatone switch comes pre-assembled and ready to install--just connect the the signal and ground wires. Purchase includes chicken-head knob, 6 number dial plate and the switch.

    The switch diameter is 1.125". The depth under the mounting surface is about 1.175". The inductor is a .75" cube which is a attached to the switch with a couple inches of lead wire on either end.

    See the specifications tab for notch frequncies.
    Select Options
    de Lisle Pentatone Switch

    de Lisle Pentatone Switch

    $45.00
    This is the same passive tone control that we use in our guitars. It's similar to the Gibson Varitone switch in function. We use a quality 6-position switch that features five frequency settings in addition to true bypass. Our design is vintage correct and a true notch filter. A "two wire" Varitone is not a proper notch filter. See the picture below for the difference in frequency response. The Pentatone switch comes pre-assembled and ready to install--just connect the the signal and ground wires. Purchase includes chicken-head knob, 6 number dial plate and the switch.

    The switch diameter is 1.125". The depth under the mounting surface is about 1.175". The inductor is a .75" cube which is a attached to the switch with a couple inches of lead wire on either end.

    See the specifications tab for notch frequncies.
    Select Options

    de Lisle Pentatone Switch

    $45.00
    Select Options
    Successfully Added to your Shopping Cart
    Adding to Cart...