Shop

View 10 25 50 Showing 26-50 of 50 Results
View Cart Product successfully added to your cart.
  • de Lisle Mosfet Overdrive Pedal

    de Lisle Mosfet Overdrive Pedal

    Hear it on tour with Robert Plant and the Sensational Space Shifters!

    The de Lisle MOSFET OD is a dirt pedal built by a tube amplifier company...and it sounds like it. From thick complex chords to shimmering lead tones, the sweet tube-like overdrive is sure to become a favorite on your board.

    Plug in and turn up the Drive control to add some texture to your sound with light overdrive, or crank the Drive knob for full-on face melting rock & roll. The de Lisle MOSFET OD performs well at either extreme. Back off the guitar's volume to clean it up, and then dig in with your pick to push it back over the edge. The result is a natural, dynamic and open sounding overdrive.

    Use the combination high/low pass filter Tone control to shape the pedal's frequency response and rich harmonics. The response is flat at 50% rotation, which allows your signal to remain transparent.

    The Level pot controls the pedal's output. There's plenty signal available to drive the front end of an amp. Or turn up the Level with the Drive rolled back to boost your the signal.

    The de Lisle MOSFET OD is hand-wired, made in the USA and features a lifetime warranty. And the blue LED is guaranteed to keep opening acts from stealing your mojo.
    $159.00

    de Lisle Mosfet Overdrive Pedal

    $159.00
    Successfully Added to your Shopping Cart
    Adding to Cart...
  • de Lisle ABY Isolated Amp Selector Switch

    de Lisle ABY Isolated Amp Selector Switch

    We believe this is simply the best active AB/Y pedal available. It features dual buffered and transformer isolated outputs, which means no signal loss, no ground loops, and no tone suck. And the circuit runs on an internally boosted dual rail power supply for increased headroom and clarity. We've also included a phase switch to keep amps or separate channels in phase.

    Another user friendly feature - when the Y switch is engaged, the selected A or B LED will remain illuminated, so you'll know which output will be active when the Y switch is disengaged.

    Our AB/Y is hand-wired in the USA with silver plated 20AWG wire and no PCB mounted jacks, switches or plugs. This pedal is built to last and comes housed in a powder coated, laser etched aluminum enclosure. As always with every piece of de Lisle gear, it's back by a lifetime warranty for your peace of mind.
    $169.00

    de Lisle ABY Isolated Amp Selector Switch

    $169.00
    Successfully Added to your Shopping Cart
    Adding to Cart...
  • de Lisle ABC Isolated Amp Selector Switch

    de Lisle ABC Isolated Amp Selector Switch

    The de Lisle ABC pedal is a great solution for multiple amp setups. It enables you to safely connect a guitar to one, two or three amps at a time without introducing ground loop hum. So don't defeat the safety grounds on your amps!

    It features a direct out plus dual buffered and transformer isolated outputs, which means no signal loss, no ground loops, and no tone suck. And the circuit runs on an internally boosted dual rail power supply for increased headroom and clarity. We've also included a phase switch to keep amps or separate channels in phase.

    Another user friendly feature - each output has a unqiuely colored LED, so you'll know exactly which switch you're stepping even on the darkest stage. Each output is individually selectable, so you can use any combination of amps you want.

    The de Lisle ABC is hand-wired in the USA with silver plated 20AWG wire and no PCB mounted jacks, switches or plugs. This pedal is built to last and comes housed in a powder coated, laser etched aluminum enclosure. As always with every piece of de Lisle gear, it's back by a lifetime warranty for your peace of mind.
    $189.00

    de Lisle ABC Isolated Amp Selector Switch

    $189.00
    Successfully Added to your Shopping Cart
    Adding to Cart...
  • de Lisle Notch Box Pedal

    de Lisle Notch Box Pedal

    Designed with feedback from Justin Adams, guitarist for Robert Plant, the de Lisle Notch Box is based on the Gibson ® Varitone circuit found in guitars like the ES-355, Lucille and Blueshawk. Our pedal version offers 6 preset notch filters for various tones along with a potentiometer to control the notch depth. There is a voicing switch that allows you to toggle between the original '59 circuit and the redesigned Varitone introduced in the Blueshawk - that's 12 linearly variable filters in all!

    The original Varitone was a simple passive device, so there was a fair amount of signal loss at higher settings. To counteract this, the Notch Box has an adjustable MOSFET boost. Set it to unity gain so your the effected and dry signals are at the same level.

    The Notch Box was designed with other pedals in mind, so it has a high impedance input and a low impedance output. It will fit nicely at any position on your board.

    The de Lisle Notch Box is hand-wired in the USA with silver plated 20AWG wire and no PCB mounted jacks, switches or plugs. This pedal is built to last and comes housed in a powder coated aluminum enclosure. As always with every piece of de Lisle gear, it's back by a lifetime warranty for your peace of mind.
    $189.00

    de Lisle Notch Box Pedal

    $189.00
    Successfully Added to your Shopping Cart
    Adding to Cart...
  • de Lisle Amp-Speaker Selector V1

    de Lisle Amp-Speaker Selector V1

    The de Lisle Amp-Speaker Selector (Version 1) was designed as a studio tool to conveniently route the output from any of the connected amplifiers to an isolation cabinet. Alternatively, a single amplifier can be paired with one of up to three individual cabinets. Signal and ground connections from the amps are isolated, and as a precaution, the unused amps see a load. Similarly, when used as a cabinet selector, jacks with no cable inserted will be switched to an internal load. So, one can use a single cabinet or two cabinets without worrying about switching to an open cabinet jack.
    $199.00

    de Lisle Amp-Speaker Selector V1

    $199.00
    Successfully Added to your Shopping Cart
    Adding to Cart...
  • de Lisle Drop Box Linearly Variable 50W Attenuator

    de Lisle Drop Box Linearly Variable 50W Attenuator

    The de Lisle Drop Box 50W attenuator allows you to knock your amp's volume down to a more manageable level. It's linearly adjustable from -2dB to -18dB. Just insert the Drop Box between your amp's output and the speaker and you're ready to rock!

    $229.00

    de Lisle Drop Box Linearly Variable 50W Attenuator

    $229.00
    Successfully Added to your Shopping Cart
    Adding to Cart...
  • de Lisle Amp-Speaker Selector V2

    de Lisle Amp-Speaker Selector V2

    The de Lisle Amp-Speaker Selector V2 was designed as a studio tool to conveniently route the output of up to four amplifiers to various speaker cabinets. Just connect your amps' outputs to numbered amplifier inputs on the rear panel. Then, hook up your speaker cabinets. Routing the signals is simple: the four switches on the front panel correspond to the four speaker connections. The 0-4 positions of each bank match that speaker cabinet to an amplifier (or 0 for not connected). Use multiple amps at the same time, swap speaker cabinets between amps, or connect multiple speakers to an amp in parallel. Signal and ground connections from the amps are always isolated from one another. And as a precaution, the unused amps see a load.
    $289.00

    de Lisle Amp-Speaker Selector V2

    $289.00
    Successfully Added to your Shopping Cart
    Adding to Cart...
  • de Lisle Amp-Speaker Selector V3 with Loop

    de Lisle Amp-Speaker Selector V3 with Loop

    Save 15% with the Amp-Speaker Selector V3 and Drop Box 50W Linearly Variable Attenuator bundle! Add our transformer isolated ABC switch to route the input signal for more savings!

    The de Lisle Amp-Speaker Selector V3 was designed as a studio tool to conveniently route the output of up to three amplifiers to various speaker cabinets. This version features a loop to allow a single attenuator or similar device to be easily shared between any combination of the amps and speakers.

    Just connect your amps' outputs to numbered amplifier inputs on the rear panel. Then, hook up your speaker cabinets. Routing the signals is simple: the three Speaker switches on the front panel correspond to the three speaker connections. The 0-3 positions of each bank match that speaker cabinet to an amplifier (or 0 for not connected).

    Connect your attenuator's input to the Send jack and its output to the Return jack. Use the front panel Send knob to connect the attenuator to any of the amps' outputs. Then, set one or more of the Speaker knobs to the return arrow icon (position 5).

    Use multiple amps at the same time, swap speaker cabinets between amps, share a single attenuator or connect multiple speakers to an amp in parallel. Signal and ground connections from the amps are always isolated from one another. And as a precaution, the unused amps see a load.
    $289.00

    de Lisle Amp-Speaker Selector V3 with Loop

    $289.00
    Successfully Added to your Shopping Cart
    Adding to Cart...
  • de Lisle Tube Tremolo Pedal

    de Lisle Tube Tremolo Pedal

    DISCONTINUED

    It's classic tube bias modulating tremolo in a pedal! This one is packed with great features including a high voltage power supply, true bypass switching, two speed ranges and a tube buffered output.
    $339.00
    Estimated ship date

    de Lisle Tube Tremolo Pedal

    $339.00
    Estimated ship date
    Successfully Added to your Shopping Cart
    Adding to Cart...
  • de Lisle Eighty-Sixed: EF86 Tube Preamp-Overdrive

    de Lisle Eighty-Sixed: EF86 Tube Preamp-Overdrive

    The de Lisle Eighty-Sixed is a tube preamp born of our unique amplifier designs. The tube line up includes an EF86 pentode fronted by a 12AX7 twin-triode. This arrangement allows the true character of the pentode to be heard, since it can be driven by a larger signal than those produced by guitar pickups. And by cranking up the Gain knob, the Eighty-Sixed makes a fantastic tube overdrive pedal. No opamps, transistors or clipping diodes--what you get is 100% high voltage pentode overdrive.
    $379.00

    de Lisle Eighty-Sixed: EF86 Tube Preamp-Overdrive

    $379.00
    Successfully Added to your Shopping Cart
    Adding to Cart...
  • de Lisle Amp-Speaker Selector 8x8

    de Lisle Amp-Speaker Selector 8x8

    The de Lisle Amp-Speaker Selector 8 x8 was designed as a studio tool to conveniently route the output of up to eight amplifiers to various speaker cabinets.

    Just connect your amps' outputs to numbered amplifier inputs on the rear panel. Then, hook up your speaker cabinets. Routing the signals is simple: the eight Speaker switches on the front panel correspond to the eight speaker connections. The 0-8 positions of each bank match that speaker cabinet to an amplifier (or 0 for not connected).

    Use multiple amps at the same time, swap speaker cabinets between amps, or connect multiple speakers to an amp in parallel. Signal connections from the amps are always isolated from one another. And as a precaution, the unused amps see a load.
    $499.00

    de Lisle Amp-Speaker Selector 8x8

    $499.00
    Successfully Added to your Shopping Cart
    Adding to Cart...
  • de Lisle Amp-Speaker Selector 7x7 with Attenuator Loop

    de Lisle Amp-Speaker Selector 7x7 with Attenuator Loop

    The de Lisle Amp-Speaker Selector 7x7 with Attenuator Loop was designed as a studio tool to conveniently route the output of up to seven amplifiers to various speaker cabinets. This version features a loop to allow a single attenuator or similar device to be easily shared between any combination of the amps and speakers.

    Just connect your amps' outputs to numbered amplifier inputs on the rear panel. Then, hook up your speaker cabinets. Routing the signals is simple: the seven Speaker switches on the front panel correspond to the seven speaker connections. The 0-7 positions of each bank match that speaker cabinet to an amplifier (or 0 for not connected).

    Connect your attenuator's input to the Send jack and its output to the Return jack. Use the front panel Send knob to connect the attenuator to any of the amps' outputs. Then, set one or more of the Speaker knobs to the return arrow icon (position 9).

    Use multiple amps at the same time, swap speaker cabinets between amps, share a single attenuator or connect multiple speakers to an amp in parallel. As a precaution, the unused amps see a load.
    $499.00

    de Lisle Amp-Speaker Selector 7x7 with Attenuator Loop

    $499.00
    Successfully Added to your Shopping Cart
    Adding to Cart...
  • de Lisle Speaker Extension Cabinet

    de Lisle Speaker Extension Cabinet

    Extension cabinets are made from solid pine and using dovetail joinery and feature a birch baffle. Your choice of available colors.
    $649.00

    de Lisle Speaker Extension Cabinet

    $649.00
    Successfully Added to your Shopping Cart
    Adding to Cart...
  • de Lisle Vintage Studio Collection Amplifiers

    de Lisle Vintage Studio Collection Amplifiers

    Available in four classic voicings, the Vintage Studio Collection of amps feature 5 watts of tube tone in a hand-wired box small enough to fit in a lunchbox. Additional features include a linearly variable attenuator and power amp in jack. Available as a head only. See tabs below for full details and specifications.
    $729.00

    de Lisle Vintage Studio Collection Amplifiers

    $729.00
    Successfully Added to your Shopping Cart
    Adding to Cart...
  • de Lisle Standard Single Cut Guitar

    de Lisle Standard Single Cut Guitar

    The de Lisle Standard Electric Guitar is loaded with features for remarkable playability and versatility. Our unique body design is cut from traditional tonewoods and finished in either urethane or lacquer. See tabs below for full details and specifications.
    $1,175.00

    de Lisle Standard Single Cut Guitar

    $1,175.00
    Successfully Added to your Shopping Cart
    Adding to Cart...
  • de Lisle Nickel Box Amplifier

    de Lisle Nickel Box Amplifier

    5 watts in a standard size single 12" cab with tones of available options. Not your average small watt amp. See tabs below for full details and specifications. Recommended speaker: Private Jack or Lil' Texas.
    $1,479.00

    de Lisle Nickel Box Amplifier

    $1,479.00
    Successfully Added to your Shopping Cart
    Adding to Cart...
  • de Lisle Double Nickel Amplifier

    de Lisle Double Nickel Amplifier

    12 watts, single-ended from a 6L6 or a little less from an EL34. See tabs below for full details and specifications. Recommended speaker: Eminence Private Jack.
    $1,679.00

    de Lisle Double Nickel Amplifier

    $1,679.00
    Successfully Added to your Shopping Cart
    Adding to Cart...
  • de Lisle 15P Amplifier

    de Lisle 15P Amplifier

    The 15W from a pair of EL84s with a 12AX7 and EF86 in the preamp. See tabs below for full details and specifications. Recommended speaker: Private Jack.
    $1,799.00

    de Lisle 15P Amplifier

    $1,799.00
    Successfully Added to your Shopping Cart
    Adding to Cart...
  • de Lisle Victor Vibe Amplifier

    de Lisle Victor Vibe Amplifier

    True pitch shifting vibrato is a rarity. The Victor Vibe has it...and quite a bit more. See tabs below for full details and specifications. Recommended speaker: Weber 12F150.
    $1,879.00

    de Lisle Victor Vibe Amplifier

    $1,879.00
    Successfully Added to your Shopping Cart
    Adding to Cart...
  • de Lisle 35P Amplifier

    de Lisle 35P Amplifier

    35W Push-Pull from a pair of 6L6s or 12W in Single-Ended mode. See tabs below for full details and specifications. Recommended speaker: Private Jack.
    $1,999.00

    de Lisle 35P Amplifier

    $1,999.00
    Successfully Added to your Shopping Cart
    Adding to Cart...
  • de Lisle 15P Studio Amplifier

    de Lisle 15P Studio Amplifier

    Packed with incredble features for amazing versatility in the studio or on the stage. Available as a head only. See tabs below for full details and specifications.
    $2,199.00

    de Lisle 15P Studio Amplifier

    $2,199.00
    Successfully Added to your Shopping Cart
    Adding to Cart...
  • de Lisle Dartford 30 Amplifier

    de Lisle Dartford 30 Amplifier

    Based on the legendary British design with linearly variable output from <1W to 30W from a pair of EL34s. See tabs below for full details and specifications. Recommended speaker: Weber Alnico Blue Dog
    $2,299.00

    de Lisle Dartford 30 Amplifier

    $2,299.00
    Successfully Added to your Shopping Cart
    Adding to Cart...
  • de Lisle Quadralux Reverb Amplifier

    de Lisle Quadralux Reverb Amplifier

    Originally developed in 2014 as one-off, this truly unique de Lisle design offers four amps in one; tweed 5E3 Deluxe, tweed 5F11 Vibrolux, Princeton Reverb and a variation of our Rutgers Reverb. See the tabs below for details and a demo.
    $2,299.00

    de Lisle Quadralux Reverb Amplifier

    $2,299.00
    Successfully Added to your Shopping Cart
    Adding to Cart...
  • de Lisle Rutgers Reverb Amplifier

    de Lisle Rutgers Reverb Amplifier

    The Rutgers Reverb is our first vintage inspired amp. An homage to a mid-sixties classic, the single channel Rutgers Reverb pumps out 23 watts through a 12″ speaker housed in a solid pine cabinet. See tabs below for full details and specifications. Recommended speaker: Weber 12F150.
    $2,399.00

    de Lisle Rutgers Reverb Amplifier

    $2,399.00
    Successfully Added to your Shopping Cart
    Adding to Cart...
  • de Lisle JDL35 Amplifier

    de Lisle JDL35 Amplifier

    Based on the classic "JTM45," featuring Gold Lion KT66s, Mercury Magnetics Radiospares output transformer and a Weber Silver Bell AlNiCo speaker. See tabs below for full details and specifications.
    $2,399.00

    de Lisle JDL35 Amplifier

    $2,399.00
    Successfully Added to your Shopping Cart
    Adding to Cart...
1
2