de Lisle Amp-Speaker Selector 12×12 Pro

de Lisle Amp-Speaker Selector 12x12 Pro

$1,599.00
de Lisle Amp-Speaker Selector 12x12 Pro
de Lisle Amp-Speaker Selector 12x12 Pro
de Lisle Amp-Speaker Selector 12x12 Pro
de Lisle Amp-Speaker Selector 12x12 Pro
de Lisle Amp-Speaker Selector 12x12 Pro
de Lisle Amp-Speaker Selector 12x12 Pro

de Lisle Amp-Speaker Selector 12x12 Pro

$1,599.00
The de Lisle Amp-Speaker 12x12 Pro was designed to improve workflow in the studio by eliminating the need to re-cable amps, fx and cabs. This version expands on our previous designs by incorporating simultaneous input switching, fx loop switching and an attenuator loop.

Turning the front panel Amplifier dial will do the following:

• Route the guitar input to the selected amp's input
• Send the amp's output to the selected speaker
• Mute all unused amps at their input
• Switch unused amps to a load
• Route the Pedalboard In / Out to the active amp's FX send and return jacks
• Place unused amp FX loops in bypass

When activated, the attenuator follows the selected amp and cabinet, so you can easily connect your Ox, Fryette, etc. to any combination of amplifier and cabinet. Should you prefer to go straight from amp to cabinet, just place the Attenuator switch in the down position to bypass the attenuator loop. Similarly, the active amp's FX loop can be bypassed by placing the FX Loop switch in the down position.

The 8x6 Pro runs off a standard 2.1mm/5.5mm center negative 9V supply, which is boosted internally for increased signal headroom. Amplifiers are transformer isolated to prevent ground loops.

Patent Pending.
Maximum quantity exceeded
Minimum purchase amount of 0 is required
Maximum purchase amount of 0 is allowed
Your Price: $1,599.00
1599.000
A one-time price of $1,599.00 will be added to your order.
Facebook
X
Email
Pinterest
  • Specs
• Input Impedance: 1 Meg
• Output Impedance: 500 Ohm
• Input Sensitivity: +15 Vp-p
• Switching Time: 4-8ms
• Contact Resistance: 0.075 Ohm
• Power Consumption: 2.6W Max
• Guitar / Pedalboard Input (1)
• Amplifier Input (12)
• FX Send (12)
• FX Return (12)
• Amplifier Output (12)
• Speaker Input (12)
• Attenuator Input (1)
• Attenuator Output(1)
• Attenuator Bypass Switch
• FX Bypass Switch
• Ground Switch (2)
• FX In
• FX Out
• Transformer Isolation
• Internally Isolated DC Power Supply
• Increased Signal Headroom
• Silver Relay Contacts with Gold Overlay
• Protection Loads for Unused Amplifiers
• Auto Muting of Unused Amplifiers
• Auto Bypass of Unused Amplifier FX Loops
• Premium Rack Chassis with Laser Etched Panels
• 9VDC 500mA Power Supply Included (300mA Minimum Required)
• Hand-Wired
• 150W Maximum Power
• Lifetime Warranty