de Lisle Guitar Co.

The de Lisle Amp-Speaker 8x6 Pro Plus with Reactive Attenuator was designed to improve workflow in the studio by eliminating the need to re-cable amps, fx and speaker cabinets. This version expands on our previous designs by incorporating a built-in reactive attenuator that can be used as a load box for silent recording along with a transformer isolated D.I., simultaneous input switching, fx loop switching and dual speaker mode.

Multiple functions are controlled by the Amplifier dial. Selecting positions 1-8 will:

• Route the guitar input to the selected amp's input
• Send the amp's output to the selected speaker
• Mute all unused amps at their input
• Switch unused amps to a load
• Route the FX In / Out to the active amp's FX send and return jacks
• Place unused amp FX loops in bypass

Easily pair any of your amps with one or two of up to six connected cabinets by rotating the speaker switch. Should you need to roll back the SPL in the room, but keep your amp operating in the sweet spot, turn on the internal reactive attenuator. Attenuation is linearly variable from -6dB up to -22.5dB. Our unique design eliminates the need for impedance matching at the amp. Just connect your amp's 8 ohm output to the 8x6 Pro Plus Amp-Speaker Selector with Reactive Attenuator, then you can use any combination of cabs between 16 and 4 ohms.

Do you still want to be able to connect an Ox, Fryette Power Station or Boss Tube Amp Expander? No problem! The rear panel jacks allow you to insert an external attenuator which disconnects the internal reactive attenuator and D.I. functions.

With the hi-fi quality, transformer isolated D.I., you can go straight into your DAW and load up your favorite IRs. Use a TS cable for unbalanced or TRS for a balanced connection to your recording interface. The 8x6 Pro Plus Amp-Speaker Selector with Reactive Attenuator can also function as a reactive load box. Just flip the switch to disconnect the speaker and record silently.

The 8x6 Pro Plus Amp-Speaker Selector with Reactive Attenuator will quickly become mission control for your studio. Need help deciding which product is the best fit for you? Please feel free to reach out by phone or email. We're happy to help!

Patent Pending.

New features for 2024 models:

There are now three options for amp input switching. DIRECT takes the front panel input and sends it directly to the input of the selected amp, bypassing any additional circuitry. This is the position for normal use. ISO, for ISOLATED, sends the input signal through an isolation transformer. This can be used to eliminate ground loops or when a low impedance output is desired. When the ground switch is in the left position, the isolation transformer is bypassed entirely and an op-amp buffer provides a low impedance output. Download the manual for the latest features and control layout.

The 15W from a pair of EL84s with a 12AX7 and EF86 in the preamp. See tabs below for full details and specifications. Recommended speaker: Private Jack.

True pitch shifting vibrato is a rarity. The Victor Vibe has it...and quite a bit more. See tabs below for full details and specifications. Recommended speaker: Weber 12F150.

35W Push-Pull from a pair of 6L6s or 12W in Single-Ended mode. See tabs below for full details and specifications. Recommended speaker: Private Jack.

The de Lisle Amp-Speaker 16x8 Stereo Pro was designed to improve workflow in the studio by eliminating the need to re-cable amps and cabs. This version expands on our previous designs by incorporating simultaneous input switching, a bypassable attenuator loop, fx loop and D.I.

The 16x8 Stereo Pro is one of our newest models to offer two input sources, like stereo outputs from your pedalboard or two guitars. A single source can also be sent to both active amplifiers by flipping the link switch beneath the input jacks. In right toggle position, Input A is routed to the input of the selected amps in both Banks A and B.

Amplifier Banks A/B each have up to 8 amps available for a total of 16. Both Banks have individual attenuator inserts on the rear panel, which can be bypassed with the corresponding front panel switch as well as an after-amp D.I.

Up to 8 cabs are split into sets of 4. The Assign switch allows Speaker A and Speaker B to be routed to either amplifier bank, so you can have Bank A with Speaker A and Bank B with Speaker B, or Bank A with Speaker B and Bank B with Speaker A. The multi-color LEDs under the speaker rotaries will match its assigned amplifier bank.

The 16x8 Stereo Pro runs off a 2.1mm/5.5mm center negative 12V supply, which is boosted internally for increased signal headroom. Amplifier inputs are transformer isolated to prevent ground loops. Unused amps are muted at their input and switched to a protective load.

Packed with incredble features for amazing versatility in the studio or on the stage. Available as a head only. See tabs below for full details and specifications.

Based on the legendary British design with linearly variable output from <1W to 30W from a pair of EL34s. See tabs below for full details and specifications. Recommended speaker: Weber Alnico Blue Dog

Originally developed in 2014 as one-off, this truly unique de Lisle design offers four amps in one; tweed 5E3 Deluxe, tweed 5F11 Vibrolux, Princeton Reverb and a variation of our Rutgers Reverb. See the tabs below for details and a demo.

The Rutgers Reverb is our first vintage inspired amp. An homage to a mid-sixties classic, the single channel Rutgers Reverb pumps out 23 watts through a 12″ speaker housed in a solid pine cabinet. See tabs below for full details and specifications. Recommended speaker: Weber 12F150.

Based on the classic "JTM45," featuring Gold Lion KT66s, Mercury Magnetics Radiospares output transformer and a Weber Silver Bell AlNiCo speaker. See tabs below for full details and specifications.

IN STOCK!